Drive in pallet racking system is a type of system designed uniquely to hold at least three pallets. Even though it provides good density concerning to the factor like storage, the selectivity quotient for this type of racking system is low. Overall, a drive in pallet racking system is best suited for items that have a long storage life and need not be used immediately.
The Characteristics to Look Out for Selecting the Best Drive in Pallet Racking System
The system can be used to load units that are stored on the depth of racking behind beams. When loads are stacked or retrieved, a cycle in the racking place from the bottom to top should be observed. These systems play a key role in the smooth running of the heavy-duty trucks into the bays. The other characteristics that one can look at are-
Expandable
The user should be able to add more racks when it is required. It is one of the most important characteristics of any drive in pallet racking system. If the user is not able to add more racks, then this system is useless.
Seasonal Usability
Since the use of certain warehouses is seasonal, the material used to build the drive in pallet racking systems should be made of suitable material to withstand the rigors of a particular season.
Large Volume Usage
The drive in pallet racking system should not crumble under a lot of weight. It should be able to hold large volumes of similar items.
Space Optimization
One of the main reasons of the high popularity of pallet racking is the optimization of space. A drive in pallet racking system should do the same and should make the user feel that the space available is used well.
Differences between a Drive in and Drive Through Racking System The first point that differentiates these two is that the drive-through system has a separate entry/exit point, while the drive-in system does not. A rack for a drive-through system is considered a good option for pallets that are data sensitive because it is rotated in a FIFO method. The other differences are- A drive-through rack will always require an additional aisle, which creates a less density of storage when compared to a drive in pallet racking system. Now this feature of requirement of additional aisle ensures that the user can create various layouts for different space requirements. The biggest advantage enjoyed by a drive-through system is that it is very efficient when it comes to separating and handling isles. Since the stock is rotated on its own, the pickers need not handle the pallets more than one time and are usually assured of choosing the first pallet that is in the system. This design helps in minimizing the damage because the drivers are frequently not required to enter the lanes for removing the products. This factor is more of a similarity than a difference between the two systems. All the users who use pallets should stick to the safety guidelines prescribed in the instruction manual. Any damage seen in either system should be reported immediately and the pallet system should be replaced or repaired. The other types of racks seen in the market include the selective rack, pallet flow rack, and the push back rack.
Selective rack – The rack can store many SKUs. Also, the mix of the storage can be changed, too. Although, it has a drawback of lower storage density in comparison to other alternatives.
Pushback rack – The pallets are placed by a forklift on carts that are nested, which ride on inclined rails.
Pallet flow rack- The rack the storage density and offers systematic first in, first out type of pallet flow.
Comments